System Start-Up
Versana Essential – User Guide 1-37
5759238-100 English Rev. 2
Login
Personal IDs and associated passwords can be preset on the
Versana Essential.
If the User Auto Logon preset is blank, you are prompted to
login.
Figure 1-20. Operator Login Window
1. Operator: Select the Operator.
2. Password: Enter Operator’s password (optional).
3. Select type of Logon or Cancel.
• OK: Standard logon
• Cancel: Cancel logon.
NOTE: When you login as administrator for the first time you
are prompted to set a password.
NOTE: A valid password must be at least 6 characters. A
password must contain at least 1 upper-case, 1
lower-case and 1 number.
To Next Page
Loading...
