GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
3 - 26 Section 3-6 - Configuration
3-6-2-4 Select User Interface Language
Figure 3-10 Select User Interface Language
Table 3-15 Language Adjustments
STEP TASK EXPECTED RESULT(S)
1. Open the Configuration Window, see 4-2-5 "Logging on to
VIVID E9 / VIVID E7 as ‘ADM’" on page 4-15.
Select System, if needed.
The System Settings window is displayed.
2. Use the Language drop down dialog, see Figure 3-10, to select
your preferred language for the on-screen interface.
The selected language will be used as soon as the unit has been
restarted.
To Next Page
Loading...
