GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
Chapter 8 - Replacement procedures 8 - 9
8-4-5 Data Management - moving all images
For instructions, please see “Disk management” in the User Manual.
8-4-6 Backing up the Patient Archive and System Configurations
Backup the Patient Archive and System Configurations.
For instructions, please see “Data Backup and Restore” in the User Manual.
An error, or a power loss may occur.
Always backup the Patient Archive and the System Configurations before loading the software! In order
to complete a successful restore of the Patient Database, as needed after a hard disk replacement, or
if all the content on the hard disk has been erased, the images must be moved away from VIVID E9 /
VIVID E7 before doing backup of the Patient Database. Depending on the location set-up, either move
the images to a remote server or to removable media.
As the images are moved, the database will point to the new location.
If the backup procedure is not completed correctly, the images and database information will be lost.
An error, or a power loss may occur.
Always backup the Patient Archive and the System Configurations before loading the software! In order
to complete a successful restore of the Patient Database, as needed after a hard disk replacement, or
if all the content on the hard disk has been erased, the images must be moved away from VIVID E9 /
VIVID E7 before doing backup of the Patient Database. Depending on the location set-up, either move
the images to a remote server or to removable media.
As the images are moved, the database will point to the new location.
If the backup procedure is not completed correctly, the images and database information will be lost.
To Next Page
Loading...
