GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
8 - 10 Section 8-4 - Reloading the software
8-4-7 Recording important settings and parameters
Always ensure that the following information is available regarding a remote printer:
• Printer Model (as selected on the VIVID E9 / VIVID E7.)
• The printer’s IP Number.
The printer’s IP number is not easily available via the VIVID E9 / VIVID E7’s menus. Print out a
status sheet on the printer. For more information, please refer to the printer’s documentation.
• If the printer is assigned to a key, record the key
An error, or a power loss may occur during the software loading.
It is considered to be a best practice to always keep a record on paper of the settings for the
VIVID E9 / VIVID E7. Verify if it is current before you start to load software!
To Next Page
Loading...
