GE Vivid E7

GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
Chapter 8 - Replacement procedures 8 - 21
8-4-10-4 Installing the Translated User Manuals from UFD
8-4-10-5 Installing the MV Option Software from UFD
Table 8-8 Installing the Translated User Manuals from UFD
Step Task
1.
The English User Manual was installed as part of the Application
Software. To be able to select another User Manual language, the
translated User Manuals must be installed next.
Follow the instructions on the screen during the installation.
Table 8-9 Installing the MV Option Software from UFD
Step Task
1.
If the VIVID E9 has the MV option, the needed MV software must
be installed from the UDF with Tomtec software.
DO NOT INSTALL THE OTHER TOMTEC SOFTWARE
OPTIONS ON THE SCANNER. THEY ARE FOR USE ON
ECHOPAC ONLY.
Follow the instructions on the screen during the installation.