GE Vivid E7

GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
Chapter 8 - Replacement procedures 8 - 127
8-6-21 Operator Panel Cable Kit Replacement
8-6-21-1 Overview
The Operator Panel Cable Kit includes three different cables, as illustrated in Figure 8-113.
• The Trackball USB Cable is used on the Operator Panel, Lower.
• The USB Video Board Flex Cable and the HV Inverter Cable are both used on the Operator Panel,
Upper.
Figure 8-113 The Operator Panel Cable Kit
TRACKBALL USB CABLE
Connects the Trackball to the Controller board.
USB VIDEO BOARD FLEX CABLE
Connects the Touch Screen to the USB Video board.
HV INVERTER CABLE
Connects the Touch Screen to the HV Inverter board.