GE Vivid E7 - Page 603

GE
D
IRECTION GB091046, REVISION 2 VIVID E9 / VIVID E7 BT’13 SERVICE MANUAL
Chapter 8 - Replacement procedures 8 - 287
8-14-2-4 BEP6 - Digital Video Recorder installation procedure
Follow these steps to install the Digital Video Recorder:
1.) Plug in the (new) DVR Board in the correct slot.
2.) Insert and fasten the fixing screw.
3.) Plug in the cables you removed earlier:.
- Connections if the DVR Board is installed in a VIVID E9 with 4D:
- Connections if the DVR Board is installed in a VIVID E9 / VIVID E7 with 2D:
4.) Install the fixing screws you removed earlier.
5.) Install the HDD.
DVI Flex Main Yggdrasil
DVI-Samtech Flex
DVR Audio
CN SATA5
CN SATA3
DVR TO SATA
DVI-Samtech Flex
DVR Audio
CN SATA5
CN SATA3
DVR TO SATA