GE RAFT VOLUSON™ P8 / VOLUSON™ P6
DIRECTION 5723243, R
EVISION 6 DRAFT (MAY 23, 2018) BASIC SERVICE MANUAL
3-60 Section 3-8 - Cellular Modem Installation
10.)Pull out two cables from REAR EMI COVER First, pull out power cable within the limits of the
possible. Therefore, pull out USB cable like below picture. To align cable edge, pull out USB
cable as much as power cable.
11.)Connect Power Cable and USB Cable to Cellular modem.
Figure 3-68 Pulling out 2 cabels from REAR EMI COVER
Figure 3-69 Connecting Power Cable and USB Cable to Celular modem
To Next Page
Loading...
