GE Voluson P6 BT16 - Chapter 3; Setup Instructions; Section 3-1 Overview; 3-1-1 The Purpose of Chapter 3

GE DRAFT VOLUSON™ P8 / VOLUSON™ P6
DIRECTION 5723243, R
EVISION 6 DRAFT (MAY 23, 2018) BASIC SERVICE MANUAL
Chapter 3 - Setup Instructions 3-1
Chapter 3
Setup Instructions
Section 3-1
Overview
3-1-1 The Purpose of Chapter 3
This chapter contains information needed to setup the Voluson™ P8 / Voluson™ P6. Included are
procedures to receive, unpack and configure the equipment.
A worksheet is provided (see: page 3-93 to page 3-94) to help ensure that all the required information
is available, prior to setup the system.
Table 3-1 Contents in Chapter Voluson™ P8 / Voluson™ P6
Section Description Page Number
3-1
Overview
3-1
3-2
Set Up Reminders
3-2
3-3
Receiving and Unpacking the Equipment
3-6
3-4
Preparing for Set Up
3-10
3-5
Connection of Auxiliary Devices
3-12
3-6
Completing the Set Up
3-25
3-7
Printer Installation
3-32
3-8
Cellular Modem Installation
3-54
3-9
System Configuration
3-62
3-10
Available Probes
3-71
3-11
Software/Option Configuration
3-71
3-12
Connectivity Setup
3-72
3-13
Network Configuration
3-75
3-14
Connectivity Setup Worksheet
3-93
3-15
Paperwork
3-95