GE Voluson P6 BT16 - 3-9-1-3 How to enter Clinic Name; 3-9-1-4 How to change Language and;or EUM Language

GE DRAFT VOLUSON™ P8 / VOLUSON™ P6
DIRECTION 5723243, R
EVISION 6 DRAFT (MAY 23, 2018) BASIC SERVICE MANUAL
Chapter 3 - Setup Instructions 3-65
3-9-1-3 How to enter Clinic Name
1.) Invoke System Setup as described in Section 3-9-1-1 on page 3-63.
2.) On the left side of the screen select GENERAL SETTINGS
and then click on the GENERALSETTINGS
tab.
3.) Select the text box to enter a new “Clinic Name” with the keyboard.
4.) Close the Service page with Save&Exit.
The clinic name will be copied into the Hospital ID in the information header.
3-9-1-4 How to change Language and/or EUM Language
1.) Invoke System Setup as described in Section 3-9-1-1 on page 3-63.
2.) On the left side of the screen select GENERAL SETTINGS
and then click on the GENERAL SETTINGS
tab.
3.) Select the desired language from the pull-down menu.
4.) Close the Service page with Save&Exit.
NOTE: After changing the language the system has to reboot.