GE RAFT VOLUSON™ P8 / VOLUSON™ P6
DIRECTION 5723243, R
EVISION 6 DRAFT (MAY 23, 2018) BASIC SERVICE MANUAL
8-70 Section 8-22 - Replacement of the MONITOR ARM
4.) Unscrew 2 screws, and then remove SPEAKER COVER LEFT/RIGHT. Refer to the figure
below.
5.) Unscrew 1 screw to remove Monitor Cable Fix bracket.
6.) Pull the LCD Cables through the LCD ARM and MONITOR HOLDER.
Figure 8-96 Unscrewing 2 screws to remove SPEAKER COVER LEFT/RIGHT
Figure 8-97 Removing the MONITOR CABLE FIX BRACKET
Figure 8-98 Pulling out the LCD Cables from LCD ARM
MONITOR CABLE FIX BRACKET
To Next Page
Loading...
