GE Voluson P6 BT16 - Page 482

GE RAFT VOLUSON™ P8 / VOLUSON™ P6
DIRECTION 5723243, R
EVISION 6 DRAFT (MAY 23, 2018) BASIC SERVICE MANUAL
8-134 Section 8-42 - Replacement of the DRFM
2.) Call the OLC to get the "Serial Key" and the "Permanent Key"
3.) Program the System Serial number and re-enter the Permanent Key
To program the System SNO, click the OPTIONS
tab:
Figure 8-194 Hardware ID on label DRFM
Figure 8-195 System Setup - Administration - Options page
Hardware ID
Field to enter
the “Serial Key”
Field to enter
Permanent key