ZP3 Fire Control Panel User Guide
Maintenance features
A range of maintenance features simplifies and improves system maintenance. These include
status reports, contamination and near-service reports, operational statistics, and a "zone walk-
test" and "sounder-test". The system can manually disable zones or individual points for
maintenance purposes.
Remote diagnostics
Remote diagnostics is available as an option, enabling some or all (depending on software
version) maintenance functions to be carried out from a remote location.
Automatic diagnostics
Automatic diagnostics continuously monitor the system for correct operation, features include:
• Automatic checking of wiring and points
• Corrupt data detection
• Disconnection of faulty or corrupt zones
• Automatic testing of sensor operation
• Verification of sensor/zone location
Sensors are automatically subjected to a self-test at regular intervals, and vital elements of the
system, such as the software configuration data and running data are verified every hour.
Accessories and peripherals
In addition to the ZP-loop devices, a range of accessories and peripheral devices is available to
provide all the elements of a complete system. The ZP3 panel, when fitted with the software
specified in the specification supports the following accessories and peripherals:
• ZP3-RDU Remote display unit (mini)
• ZP3-RDU Remote display unit (full-function)
• ZP3-RAC Remote I/O accessory cabinet
• ZP3-RL8 Addressable relay board, 8-way
• ZP3-MA8 Addressable sounder driver board (monitored), 8-way
• ZP3-MIP8 Addressable input board, 8-way
• ZP3-OP24 Addressable transistor output board, 24-way
• ZP3-SCB-D Control bus driver board
• ZP3-SCB-R Control bus receiver board
• ZP3-NET1 Network driver board, single
• ZP3-SB232 Serial communications board, RS232
• ZP3FBR-2-B1 Fireman’s interface panel (Swedish)
• ZP3FBR-2-R1 Fireman’s repeater panel
• ZP3AB-NLM2 Network loop monitor
• ZP471A Radio loop module (receive only)
• ZP472A Radio loop module (transmit and receive)
• ZP3AB-MD3 Modem kit
Later software may support additional or different devices. If in doubt, check with your local
supplier.
Page 4 Revision 11 (05/01/2010)
To Next Page
Loading...
