GEA D 10 - Page 53

8555-9201-000 / 0109 53
Mechanical Separation / GEA Westfalia Separator
4.8 Alarm #10 - Sludge pump fault
SLUDGE PUMP FAULT
Program stop
Alarm#10 ENTER
Text display Possible causes Action
Sludge pump overloaded.
• Check protective switch and current
consumption.
Sludge pump mechanically blocked.
•
Check pump.
Valve in the pressure line closed.
•
Check valves.
Pipe on the suction and pressure side
of the pump blocked.
• Check pipes.
Electrical connections incorrect.
• Check electrical connections and
wiring.
Help text – information on the control system
ENT E R
Step 1 Acknowledge fault
HEL P
Step 2
Press key >F1<
Help on alarm
Key >HOME<back
Page 1
SLUDGE PUMP FAULT
Please check:
Protective switch
Current consumption
->
Page 2
Pump
Valves
Pipes
Electr. connections
->
Page 3
Wiring
back with ENTER
F1