EasyManuals Logo

GEA VARIVENT Series User Manual

GEA VARIVENT Series
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
the component is used improperly
the component is operated under impermissible conditions
2.4.1 Principles for safe operation
Dangerous situations during operation can be avoided by safety-conscious and
proactive behaviour of the staff.
To ensure safe operation of the valve the following principles apply:
The Operating Instructions must be kept ready to hand at the valve's place of
use. They must be complete and in clearly legible form.
Only use the valve for its intended use.
The valve must be functional and in good working order. Check the condition
of the valve before starting work and at regular intervals.
Wear tight-fitting work clothing for all work on the valve.
Ensure that nobody can get hurt on the parts of the valve.
Immediately report any faults or noticeable changes on the valve to the
person responsible.
Never touch the pipes and the valve when these components are hot! Avoid
opening the valve unless the process plants have been emptied and
depressurised.
Observe the accident prevention regulations and all local regulations.
2.4.2 Environmental Protection
Harm to the environment can be avoided by safety-conscious and proactive
behaviour of the staff.
For environmental protection the following principles apply:
Substances harmful to the environment must not be discharged into the
ground or the sewage system.
Always observe the pertinent regulations relating to waste avoidance,
disposal and utilization.
Substances harmful to the environment must be collected and stored in
suitable containers. Clearly mark the containers.
Dispose of lubricants as hazardous waste.
2.4.3 Electrical Equipment
For all work on electrical equipment, the following principles apply:
Access to electrical equipment should only be allowed to qualified
electricians. Always keep unattended switch cabinets locked.
Modifications of the control system can affect the safe and reliable operation.
Modifications are only permitted with the express permission of the
manufacturer.
Safety
General safety instructions and dangers
430BAL008583EN_1
12.08.2019 11

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the GEA VARIVENT Series and is the answer not in the manual?

GEA VARIVENT Series Specifications

General IconGeneral
SeriesVARIVENT
ActuationPneumatic
Connection TypesClamp, weld end, threaded, flange
ApplicationFood, beverage, dairy, pharmaceutical, and chemical industries
StandardsEHEDG, FDA, 3-A
MaterialsStainless steel

Related product manuals