GEA VARIVENT Series User Manual

When working with the component, a distinction is made between the following
user groups:
User groups
Staff Qualifications
Operating personnel Adequate instruction and sound knowledge in the following areas:
•
Functionality of the component
•
Operating sequences on the pump
•
What to do in case of an emergency
•
Lines of authority and responsibilities with respect to the task
Maintenance personnel Appropriate training and a sound knowledge of the structure and
functionality of the component.
Sound knowledge in the following areas:
•
Mechanical equipment
•
Electrical equipment
•
Pneumatic system
Authorization with regard to safety engineering standards to carry
out the following tasks:
•
Setting devices into operation
•
Earthing of devices
•
Marking of devices
The relevant certificates of qualification must be submitted before
work can be carried out on ATEX certified machines.
2.7 Safety equipment
2.7.1 Signs
Dangerous points on the valve are indicated by warning signs, prohibition signs
and mandatory signs.
The signs and notes on the valve must always be legible. Any illegible signs must
be replaced immediately.
Safety
Safety equipment
430BAL008583EN_1
12.08.2019 13

GEA VARIVENT Series Specifications

General

Series	VARIVENT
Actuation	Pneumatic
Connection Types	Clamp, weld end, threaded, flange
Application	Food, beverage, dairy, pharmaceutical, and chemical industries
Standards	EHEDG, FDA, 3-A
Materials	Stainless steel