12 Decommissioning
12.1 Safety precautions
For shutting down, the following principles apply:
•
Switch off the compressed air.
•
Switch off the component with the main switch.
•
Padlock the main switch (if fitted) in the off position to prevent it from being
switched back on. The key to the padlock must be deposited with the person
responsible until the machine is restarted.
•
For longer periods of standstill, observe the storage conditions, see
Section 4.3, Page 16.
12.2 Disposal
12.2.1 General notes
Dispose of the component in an environmentally safe manner. Observe the
statutory waste disposal regulations applicable at the place of installation.
The component consists of the following materials:
•
Metals
•
Synthetic materials
•
Electronic parts
•
Lubricants containing oil and grease
Separate the different materials and dispose of them correctly sorted. Also
observe the instructions regarding disposal in the operating instructions for the
individual components.
Decommissioning
Safety precautions
430BAL008583EN_1
34 12.08.2019
To Next Page
Loading...
Need help?
General
