MC-MP-SBD O wner’s Manual
31
M C-M P-SBD Operation and Functions
On/ Off Key
Jet Keys
By default, the system is
always on as soon as it is
under power. The unit will
regulate the spa tempera-
ture to the desired Set
Point and the display will
show the current water
temperature.
Press On/Off key to shut
the system down (i.e., to program Stand-By mode) for
30 minutes. The "O FF" message will be displayed. All keys will be
disabled until you press On/Off again to reactivate the system
before the expiration of the 30-minute delay.
Pump keys are used to
turn Pump 1, Pump 2 on
or off, and to select be-
tween low and high
speeds.
Press Pump 1 or Pump 2
to turn Pump 1or 2 on at
low speed. Press a second
time to change to high
speed for dual-speed
pump configuration.
Press a third time to turn
the pump off.
The "Pump 1" or "Pump 2" indicator lights up on the display
when either pump is on at high speed. It flashes when either
pump is on at low speed.
A built-in timer will turn either pump off after a predetermined
period of time (see low level programming page 25), unless they
have been manually turned off first.
1st press = low speed
2nd press = high speed
(for dual-speed pump)
3rd press = off
"Pump 1" light indicator
Operating Instructions
To Next Page
Loading...
Need help?
General
