Gecko M-CLASS MC-MP-SBD - Miscellaneous; Factory Default Settings

MC-MP-SBD O wner’s Manual
45
- Jumper default setting: JMP1 = HC
- Pump 1: 240 VAC output
- Pump 2: 240 VAC output
- O zonator: 120 VAC output
- Circ. pump: 120 VAC output
- Blower: 120 VAC output
- Light: 12 VAC output
- Heater: 240 VAC output
- Fiber box: 120 VAC output
Water temperature at 95ºF (35ºC)
N ormal Mode
Fahrenheit (ºF) temperature
Keypad unlocked
Jumper
O utputs
Set Point
Keypad
ºF / ºC
Lockout
Status
Factory Default Settings
Miscellaneous