MC-MP-SBD O wner’s Manual
33
"Set Point" symbol
For spas with an optional fiber box, press the Light key once to
turn the fiber box on (motor & light). Pressing a second time turns
fiber box motor off, but leaves light on, allowing you to select
color options. Press a third time to turn both the fiber motor &
light off.
When the fiber box light is on, the "Light" indicator will be solid
(non-flashing). When both fiber box light and motor are on, the
"Light" indicator will flash.
A built-in timer will turn the fiber box off after 2 hours, unless you
turn it off manually first.
M C-M P-SBD Operation and Functions
Up & Down
Arrow Keys
Up & Down keys are used
to set the temperature of
the water.
Press Up or Down key
once to display Set Point
temperature. N ote: the
Set Point symbol indicates
the desired temperature,
N OT the current temper-
ature of the water.
Press and hold
Up or Down key to regulate water temperature.
The temperature setting will be displayed for 5 seconds to
confirm your selection.
Water temperature can be adjusted by one degree increments
from 59 to 104°F (15 to 40°C).
Light Key
(Fiber Box)
Operating Instructions
To Next Page
Loading...
Need help?
General
