Gecko M-CLASS MC-MP-SBD User Manual

MC-MP-SBD O wner’s Manual
42
Error Displays
Alarm & Error Displays
Flashing dots means the system has detected a problem with the pressure switch
(water flow related error message) or the Hi-limit probe protection.
3 flashing dots are displayed:
A problem has been detected.
Do not enter the w ater! Check and open water valves. Clean filter if
necessary. Check water level. Add water if necessary.
Shut power off and power your spa up again to reset the system.
Call your dealer or service supplier if problem persists.
W ater temperature is flashing:
Water temperature in the spa has reached 112˚ F (44˚ C).
Do not enter the w ater! Allow w ater to cool down. The system will
reset itself when water tem-perature reaches 109˚ F (43˚ C).
Call your dealer or service supplier if problem persists.

Gecko M-CLASS MC-MP-SBD Specifications

General

Brand	Gecko
Model	M-CLASS MC-MP-SBD
Category	Spa Accessories
Language	English