Geeetech I3 X - Page 19

www.geeetech.com
ShenZhen GETECH CO.,LTD
16
4.2 Use LCD Control Panel to Test
4.2.1 Motor Direction Test
Functions of the knob on LCD:
1. Press the knob: OK or enter the sub-menu
2. Turn the knob: to scroll through the options, or change parameters
Note: Turn the knob during printing, you can change the Feed rate in real time.
After learning about the functions of the knob on the LCD, press the knob to enter sub-menu and
choose Prepare：
Choose Move axis：