1 Software Resources
1.1 Repetier-Host
We use the latest Repetier host 1.6.0 as the printer control software, here is the link for download:
http://www.geeetech.com/wiki/index.php/Repetier-Host#Download
After downloading and installation, it can be used.
1.2 Driver
Connect the printer to computer with USB cable, the motherboard driver installer will automatically
appear. If not, you can download FT232RQ here, which is the driver of GT2560:
http://www.geeetech.com/wiki/index.php/Prusa_I3_X#Install_the_drivers
To Next Page
Loading...
