page | 39
System Settings
The System tab provides controls for various other switcher features. Each of these
controls is described below.
► Main RS-232 Feedback
By default, RS-232 feedback is set to On, meaning all command will send a response.
1. Click the Off button to disable RS-232 feedback.
2. Click the On button to enable RS-232 feedback.
► DownloadCurrentCongurationtoPC
Saves the current switcher conguration to a le on your computer.
1. Click the Download button.
2. The following dialog will be displayed (see following page).
Basic Operation
The Web Interface
To Next Page
