14 • Chapter 3 Inspection Procedure, Component Identification and Standard Specification AGy-EV Instruction manual
3.1.3 Nameplate
Check that all the data stated in the nameplate enclosed to the inverter correspond to what has been ordered.
Figure 3.1.3.1: Identification Nameplate (example for 575V series)
Type : AGyEV- 3010 -KBX-5 S/N: 03062492
Inp: 575Vac 50/60Hz 3Ph
15A @575 Vac With line Choke
Out : 0-575Vac 400Hz 3Ph 10Hp @ 575Vac
13,3A @575V Cont. Serv. 12,6A @575Vac Ovld 150%
SHORT CIRCUIT WITH STAND RATING 10KA, 600Vac max
LISTED
INDUSTRIAL CONTROL EQUIPMENT
31KF
®
Type: Inverter model
S/N: Serial number
Main Power In: Power supply voltage - AC Input current - Frequency
Main Power Out: Output voltage - Output current - Output frequency
Figure 3.1.3.2: Firmware & Card Revision Level Nameplate
Firmware HW release S/N 0162330 Prod.
R elease
D F P R S BU SW . CFG
CONF
C 2.03 A -.A -.- 1.000 A1
Figure 3.1.3.3: Nameplates Position
To Next Page
Loading...
