Chapter 2 - Installation 19
© 2018 Geist
GM1196 R-Series v5 Instruction Manual
Installation
1. Using appropriate hardware, mount unit to rack. See next section for examples.
2. Plug PDU into an appropriately-rated and protected branch-circuit receptacle.
3. Plug in the devices to be powered by the PDU.
4. Turn on each device connected to the PDU. Sequential power-up is recommended to
avoid high inrush current.
Mounting
Optional brackets sold separately.
1. Using appropriate hardware, mount unit to rack. (See below examples.)
2. Plug PDU into an appropriately-rated and protected branch-circuit receptacle.
3. Plug in the devices to be powered by the PDU.
4. Turn on each device connected to the PDU. Sequential power-up is recommended to
avoid high inrush currents.
To Next Page
Loading...