Chapter 3 - Setup 69
© 2018 Geist
GM1196 R-Series v5 Instruction Manual
Figure 3-44 Syslog Configuration Page
Event log data can be downloaded by clicking on the CSV link at that top of the page. The
event log will show system events such as user logins, configuration changes, service
status, etc. The event log does not contain measurement data captured by the PDU as
that data is located in the Data Log which can be found in the Sensors -> Logging page on
the GUI.
Admin
The Admin page allows the administrator of the device to save their contact information
along with the device description and location. Once the info is saved by an administrator,
other (non-administrator) users can view the information. Also, the System Label can be
modified on this page. This label is typically shown in the title bar of the web browser's
window, and/or on the browser tab(s) currently viewing the device.
NOTE
This information is strictly for the users' and administrator's
convenience. The unit will not attempt to send emails to the
"Administrator Email" address and this address cannot be
chosen as the Target of an Event Action when configuring an
Alarm or Warning Event.
To Next Page
Loading...