GEM 3030 mFlow - 13 Error Messages

25 / 40
3030 mFlow
13 Error messages
No. Error message Description Condition for the occurrence of the error
000 NO ERROR There are no errors
010 Our of Range
The flow rate/flow velocity exceeds the
value of Qmax or is below the value of
Qmin (AnalogOutput).
Adjust Qmin and Qmax or reduce or increase the flow
020 Wrong dir
Flow in negative flow direction (> 0.2
m/s)
Ensure the correct flow direction
All error messages can be read in the menu item ErrorList (1 Service / 1.3 Diagnosis).
The menu item ClearErrorList (1 Service/ 1.3 Diagnosis) can be used to clear the internal error memory.