Gema OptiSpray DPP01 - Spare Parts List; Ordering Spare Parts

V 03/13
OptiSpray DPP01 Spare parts list • 33
Spare parts list
Ordering spare parts
When ordering spare parts for powder coating equipment, please indicate
the following specifications:
- Type and serial number of your powder coating equipment
- Order number, quantity and description of each spare part
Example:
- Type OptiSpray DPP01
Serial number 1234 5678
- Order no. 203 386, 1 piece, Clamp - Ø 18/15 mm
When ordering cable or hose material, the required length must also be
indicated. The spare part numbers of this yard/meter ware is always
marked with an *.
The wear parts are always marked with a #.
All dimensions of plastic hoses are specified with the external and inter-
nal diameter:
Example:
Ø 8/6 mm, 8 mm outside diameter (o/d) / 6 mm inside diameter (i/d)
WARNING!
Only original Gema spare parts should be used, because the haz-
ardous location approval will be preserved that way! The use of
spare parts from other manufacturers will invalidate the Gema guar-
antee conditions!