V 03/13
4 • General safety regulations OptiSpray DPP01
3. Observance of the operating, service and maintenance instruc-
tions specified by the manufacturer is also part of conformity of
use. The OptiSpray DPP01 should only be used, maintained and
started up by trained personnel, who are informed about and are
familiar with the possible hazards involved.
4. Start-up (i.e. the execution of a particular operation) is forbidden
until it has been established that the OptiSpray DPP01 Dense
phase pump has been set up and wired according to the guide-
lines for machinery (2006/42/EG). EN 60204-1 (machine safety)
must also be observed.
5. Unauthorized modifications to the OptiSpray DPP01 Dense
phase pump exempt the manufacturer from any liability from re-
sulting damage.
6. The relevant accident prevention regulations, as well as other
generally recognized safety regulations, occupational health and
structural regulations are to be observed.
7. Furthermore the country-specific safety regulations must be ob-
served.
Explosion protection Protection type Temperature class
II 3 D
IP54 T6
Product specific security measures
-
The installation work, to be done by the customer, must be
carried out according to local regulations
-
It must be observed, that all components are grounded ac-
cording to the local regulations, before start-up
Note:
For further security information, see the more detailed Gema safety
regulations!
To Next Page
Loading...
