V 03/13
OptiSpray DPP01 General safety regulations • 3
General safety regulations
This chapter specifies the fundamental safety regulations that must be
followed by the user and third parties using the OptiSpray DPP01 Dense
phase pump.
These safety regulations must be read and understood before the OptiS-
pray DPP01 Dense phase pump is used.
Safety symbols (pictograms)
The following warnings with their meanings can be found in the Gema
operating instructions. The general safety precautions must also be fol-
lowed as well as the regulations in the operating instructions.
DANGER!
Danger due to live electricity or moving parts. Possible consequences:
Death or serious injury
WARNING!
Improper use of the equipment could damage the machine or cause it to
malfunction. Possible consequences: minor injuries or damage to equip-
ment
INFORMATION!
Useful tips and other information
Conformity of use
1. The OptiSpray DPP01 Dense phase pump is built to the latest
specification and conforms to the recognized technical safety
regulations. It is designed for the normal application of powder
coating.
2. Any other use is considered as non-conform. The manufacturer
is not responsible for damage resulting from improper use of this
equipment; the end-user alone is responsible. If the OptiSpray
DPP01 Dense phase pump is to be used for other purposes or
other substances outside of our guidelines then Gema Switzer-
land GmbH should be consulted.
To Next Page
Loading...