2.0 - INTRODUCTION
Dear Customer,
Thank you for having chosen a Gemini alarm.
This manual has been written for you so that you can acquaint yourself with
and get the best operation results with your motorbike alarm.
We recommend you to read this manual both carefully and entirely here you
will find some important information, advices, and warnings that will assist you
in operating and making the most of your device.
Gemini's alarms, model 7853, are specifically designed for two-wheel vehicle
protection.
We kindly ask you to check the model you own, verifying the function and the
accessories available with your installer.
Thanks to a safety and comfort functionality, you can program the device
according to your actual needs.
Indeed, although equipped with a number of available functions, the device is
programmed and delivered to the final customer in the so-called “basic”
configuration.
Your alarm is also provided with a PIN-CODE. In case of emergency, the alarm
may be switched off by using the vehicle ignition key, without the need of
control modules such as remote controls and electronic keys.
In order to prevent unauthorized alarm deactivation, we strongly recommend
to change the initial code, which is the same in all systems by factory settings.
For this reason too, we also suggest to keep this manual safely for future use.
In order to better understand the importance of the topics discussed in this
manual, some icons will be included.
These are listed below, along with a brief description of their meaning and
importance level.
PAG.2 PAG.3
We also recommend you to always wear your crash helmet, keep lights on and
observe the speed limit, when riding your motorbike.
Enjoy your reading… and have a nice trip!
1.0 - CONTENTS
1.0
2.0
3.0
4.0
5.0
6.0
7.0
8.0
9.0
10.0
- CONTENTS.
- INTRODUCTION.
-ALARM CONTROL DEVICES DESCRIPTION.
3.1 - Remote control.
3.2 - Electronic key.
-ALARM OPERATION WITH BASIC CONFIGURATION.
4.1 -Arming.
4.2 - Trunk open or seat lifted-up signalling.
4.3 - Neutral time.
4.4 - Siren exclusion.
4.5 - Shock sensor exclusion.
4.6 -Armed condition.
4.7 -Alarm.
4.8 - L .
4.9 - Neutral time between two alarm signals.
4.10 -Alarm system disarming without alarm memory.
4.11 -Alarm system disarming with alarm memory.
- EXTRAFUNCTIONS DESCRIPTION.
5.1 -Acoustic and optic signalling.
5.2 - Remote controlled panic alarm.
5.3 - Shock sensor.
5.4 - Passive arming.
5.5 -Anti-hijacking function.
5.6 - Pre-alarm.
5.7 -Anti-distraction.
- SHOCK SENSORADJUSTMENT.
-.
-.
-.
imiting the acoustic signal
SENSORADJUSTMENT
OF SYSTEM UNLOCK BY PIN-CODE
EXAMPLE OF SHOCK
UNLOCK PROCEDURE BY PIN-CODE
EXAMPLE
- EXAMPLE OF PIN-CODE PERSONALIZATION.
- SLEEP MODE ACTIVATION/DEACTIVATION.
- HAZARD SIGNALLING.
- REMOTE CONTROL BATTERIES REPLACEMENT.
- USE AND MAINTENANCE.
- PRODUCT DISPOSAL.
- WARRANTYCONDITION.
- CONFORMITY.
11.0
12.0
13.0
14.0
15.0
16.0
--.-
UK
WARNING
!
CAUTION
NOTE
It shows a real risk of severe damages to the vehicle and to its alarm
system in case these instructions are not complied with.
It shows a real risk of damages to the system or of any operative
malfunctions of the system in case these instructions are not complied
with.
It provides for useful information.
To Next Page
Loading...
