4.1 Unpacking the VisualiX system components
The Visualix system is carefully inspected and packaged prior to shipment. If the Visualix
system was shipped to you, please remove the contents of the shipping container and
be sure to identify and directly locate each of the system components shown below.
Report any damaged components to the shipping company and any missing
components to your dealer within 24 hours of receiving the shipment.
4.2 System Components
1) X-ray image sensor
consisting of a special CCD sensor specically constructed for use in radiography,
enclosed in a hermetically sealed ergonomic capsule, the sensitive surface of which
is covered by a thin layer of a scintillator through which X-ray radiation is converted
into light and then into an electric charge.
The sensor type reference part number appears on the IME label,
see paragraph 3.2
Sensor Large area (Size 2)
Sensor Universal size (Size 1)
To Next Page
Loading...
