Gendex VisualiX
TM
eHD
20
User and Service Manual Doc #4519 986 19041 - April 2005
21
User and Service Manual Doc #4519 986 19041 - April 2005
Use
7.1 Acquisition of radiographic images
Turn on the PC on which the VisualiX is installed and launch the application software,
such as VixWin (please refer to the Software Manual for information on the software
program).
1) Set the required technical settings (exposure time, etc.) on the X-ray generator.
2) Apply a new disposable cover to the image sensor, making sure that it covers the
portion of the cable which may come into contact with the patient.
7
To Next Page
Loading...
Need help?
General
