Generac Power Systems 6103 EcoGen User Manual

Troubleshooting
Installation Guidelines for Air-Cooled Generators 41
STEPPER
OVERCUR-
RENT
RED Unit will not start in AUTO with 2-
wire start signal.
Check the
LEDs/Screen
for alarms.
Contact servicing dealer.
MISWIRE RED Unit will not start in AUTO with 2-
wire start signal.
Check the
LEDs/Screen
for alarms.
Contact servicing dealer.
OVERVOLTAGE RED Unit will not start in AUTO with 2-
wire start signal.
Check the
LEDs/Screen
for alarms.
Contact servicing dealer.
LOW BATTERY YELLOW Yellow LED illuminated in any
state.
Check screen
for additional
information.
Clear alarm. Navigate to the BATTERY
MENU on the control pad LCD. Contact
servicing dealer if battery is GOOD.
Replace battery If CHECK BATTERY is
displayed.
BATTERY
PROBLEM
YELLOW Yellow LED illuminated in any
state.
Check screen
for additional
information.
Contact servicing dealer.
CHARGER
WARNING
YELLOW Yellow LED illuminated in any
state.
Check screen
for additional
information.
Contact servicing dealer
SERVICE A YELLOW Yellow LED illuminated in any
state.
Check screen
for additional
information.
Perform SCHEDULE A maintenance.
Press ENTER to clear.
SERVICE B YELLOW Yellow LED illuminated in any
state.
Check screen
for additional
information.
Perform SCHEDULE B maintenance.
Press ENTER to clear.
Inspect Battery YELLOW Yellow LED illuminated in any
state.
Check screen
for additional
information.
Inspect battery. Press ENTER to clear.
Table 8-2. Generator Diagnostics (Continued)
Active Alarm LED Problem
Things to
Check
Solution

Generac Power Systems 6103 EcoGen Specifications

General

Brand	Generac Power Systems
Model	6103 EcoGen
Category	Inverter
Language	English