Need help?Do you have a question about the General Climate CU-S05CR and is the answer not in the manual?
General| Cooling Capacity | 5000 BTU/h |
|---|---|
| Refrigerant | R410A |
| Type | Split System |
| Power Supply | 220-240V, 50Hz |
| Indoor Unit Dimensions | 730x180x254 mm |
| Outdoor Unit Dimensions | 681x255x428 mm |
| Indoor unit noise level | 34 dB |
| Air Flow | 300 m3/h |
| Operating Temperature | 18-43 °C |
| Noise Level | 49 dB |
| Dimensions (H x W x D) | 254 x 730 x 180 mm (Indoor), 428 x 681 x 255 mm (Outdoor) |
| Weight | 7 kg (Indoor), 20 kg (Outdoor) |
Essential safety instructions to prevent injury and equipment damage.
Critical warnings regarding installation, operation, and maintenance.
Details the functions and operations of the indoor unit.
Details the functions and operations of the outdoor unit.
Provides the physical dimensions of the indoor unit.
Provides the physical dimensions of the outdoor unit.
Defines operating temperature range for cooling mode.
Defines operating temperature range for heating mode.
Electrical schematic representation of the unit's circuits.
Electrical wiring connections for the unit.
Specifies torque values for installation fasteners.
Guidelines for selecting and connecting power and control cables.
Requirements for refrigerant pipe length and vertical/horizontal distances.
Procedure for removing air and moisture from refrigerant lines.
Procedure to recover refrigerant during re-installation.
Procedure for purging air after re-installation.
Procedure to balance refrigerant charge.
Procedure for creating a vacuum in the system.
Procedure for adding refrigerant to the system.
Cooling capacity data for GC/GU-S05CR models.
Cooling capacity data for GC/GU-S07HR models.
Cooling capacity data for GC/GU-S09HR models.
Cooling capacity data for GC/GU-S12HR models.
Cooling capacity data for GC/GU-S18HR models.
Operating conditions for the electronic control system.
Explanation of symbols used in electronic functions.
General overview of the unit's electronic functions.
Details on safety and protection features of the unit.
Operation mode for fan only.
Details of the cooling operation.
Details of the dehumidifying operation.
Details of the heating operation.
Operation during defrosting cycle in heating mode.
Automatic selection of operation mode.
Function to manually force cooling operation.
Mode for comfortable sleep operation.
Automatic restart after power failure.
Optional anion feature.
Explanation of indicator lights on the display board.
General troubleshooting steps for common issues.
Flowchart for diagnosing operational problems.
Troubleshooting steps for unit resetting during operation.
Troubleshooting for specific lamp status.
Troubleshooting for specific lamp status.
Troubleshooting for specific lamp status.
Troubleshooting for specific lamp status.
Troubleshooting for specific lamp status.
To Next Page