General Dynamics Itronix GD8200 - Windows Keys; Radio ON;OFF Switch (Option); Turn All Radios on or off; Application Launch Key

GD8200 User Guide
Windows
®
Keys
The keyboard has two keys that perform Windows
®
-specific functions.
General Dynamics Itronix 72-0146-001
Key Icon Description
Windows
®
Logo Key START BUT TON Combinations with this key perform special functions. Below are a few exam-
ples:
+ TAB (Activates next Taskbar button)
+ E (Opens My Computer in Windows
®
Explorer)
+ M (Minimizes all Windows)
SHIFT + + M (Restores Minimized Windows)
+ R (Displays Run dialog box)
Refer to Keyboard Shortcuts in Windows
®
Help and Support for a complete list of Windows
®
key combinations.
Application Key Opens the application’s context menu (same as right-click)
Radio ON/OFF Switch (option)
The keyboard has two keys that perform Windows
®
-specific functions.
CAUTION FAA regulations require that all transmit/receive devices be turned off during flight. If you have radios in your
computer (including GPS) and your computer is equipped with a Radio ON/OFF Switch, please use it to turn your radios off
during flight. If you have radios and you do not have a switch to turn the radios off, either leave your computer off during flight or
contact your help desk for assistance.
The wireless Radio ON/OFF Switch is the middle button above the keyboard. This switch toggles the power on and off to all radio
devices. Radio devices include GPS, Bluetooth
®
, WLAN, and WWAN radios.
Turn all Radios On or Off
1. Slide the radio switch to the left to power off all radio devices (airplane mode).
2. Slide the radio switch to the right to turn radio power on.
Application Launch Key
The application launch key is the right button above the keyboard. Press this key to open a specific application you have set
following the instructions below:
Program the Application Launch Key in Windows
®
7
1. Select Mobile Computer Tools, OnScreenControl.
2. Select Launch Key Settings, Set, and then select Run. Click on Configure. Select Browse and choose an application based on its
path. To complete the settings, select Ok three times.
Getting Familiar With Your Computer