General Dynamics Itronix GD8200 - PCH-FW Configuration

GD8200 User Guide
Customizing Your BIOS
General Dynamics Itronix 72-0146-001
Field Setting Description
TPM Support
Enable
dISABlEd
Enables Trusted Platform Module (TPM) support. Operating system will
not show TPM. Reset of platform is required.
TPM State Enable
dISABlEd
Enables or Disables the TPM module.
NOTE: Computer will reboot during restart in order to change the State of
TPM.
Pending TPM Operation None Displays any pending TPM operation.
TPM Enabled Status None Displays the TPM Enabled Status.
TPM Active Status None Displays the TPM Active Status.
TPM Owner Status None Displays the TPM Owner Status.
PCH-FW Configuration
The PCH-FW Configuration is used to configure
Management Engine technology parameters.
Field Setting Description
ME FW Version None Displays the Firmware Version
ME Firmware Mode None Disables the Firmware Mode
ME Firmware Type None Displays the Firmware Type
ME Firmware SKU None Displays the Firmware SKU
Firmware Update
Configuration
Sub-menu Provides the user with the ability to update the firmware configuration.