General Dynamics DIGITAL TRACKING RECEIVER - Page 102

Appendix C– DTR Remote M&C Protocol CG-6073 (Rev R, June, 2012)
41
RESTORE BEACON1
Path: / CONFIGS BEACONS RESTORE-BEACONS RESTORE-BEACON1
Type: Executable
Syntax: RESTORE-BEACON1
Notes: Executing each item in this menu will RESTORE values previously stored as a
BEACON state: FREQUENCY, INPUT ATTEN, POL SELECT, FILTER, SLOPE, VOLT
RANGE, MIN REF LVL, and ATTENUATION.
RESTORE BEACON2
Path: / CONFIGS BEACONS RESTORE-BEACONS RESTORE-BEACON2
Type: Executable
Syntax: RESTORE-BEACON2
Notes: Executing each item in this menu will RESTORE values previously stored as a
BEACON state: FREQUENCY, INPUT ATTEN, POL SELECT, FILTER, SLOPE, VOLT
RANGE, MIN REF LVL, and ATTENUATION.
RESTORE BEACON3
Path: / CONFIGS BEACONS RESTORE-BEACONS RESTORE-BEACON3
Type: Executable
Syntax: RESTORE-BEACON3
Notes: Executing each item in this menu will RESTORE values previously stored as a
BEACON state: FREQUENCY, INPUT ATTEN, POL SELECT, FILTER, SLOPE, VOLT
RANGE, MIN REF LVL, and ATTENUATION.
RESTORE BEACON4
Path: / CONFIGS BEACONS RESTORE-BEACONS RESTORE-BEACON4
Type: Executable
Syntax: RESTORE-BEACON4
Notes: Executing each item in this menu will RESTORE values previously stored as a
BEACON state: FREQUENCY, INPUT ATTEN, POL SELECT, FILTER, SLOPE, VOLT
RANGE, MIN REF LVL, and ATTENUATION.