General Dynamics DIGITAL TRACKING RECEIVER - Page 78

Appendix C– DTR Remote M&C Protocol CG-6073 (Rev R, June, 2012)
17
BPS
Path: / CONFIGS COMM-PARAM PORT-1 BPS
Type: Data Editor
Syntax: BPS [= n] | [D]
Range: Integer: 0 .. 6
0 1200
1 2400
2 4800
3 9600
4 19200
5 38400
6 57600
Notes: BPS refers to the bits per second (BAUD) transmitted/received by the port.
BPS
Path: / CONFIGS COMM-PARAM PORT-2 BPS or
/ CONFIGS COMM-PARAM PORT-3 BPS
Type: Data Editor
Syntax: BPS [= n] | [D]
Range: Integer: 0 .. 7
0 1200
1 2400
2 4800
3 9600
4 19200
5 38400
6 57600
7 115200
Notes: BPS refers to the bits per second (BAUD) transmitted/received by the port.
COMM PARAMETERS
Path: / CONFIGS COMM-PARAM
Type: Sub Menu
Syntax: COMM-PARAM
Notes: COMM PARAMETERS allow serial port configuration. BPS and SHELL may be set, as
well as NEWLINE and ECHO, which only apply to ports set to M&C shell. Any
change to communications parameters will cause the Port to RESET and the SHELL
will restart.