General Dynamics DIGITAL TRACKING RECEIVER - Page 79

Appendix C– DTR Remote M&C Protocol CG-6073 (Rev R, Jun, 2012)
18
CONFIGS
Path: / CONFIGS
Type: Sub Menu
Syntax: CONFIGS
Notes: The CONFIGS menu provides access to all configuration parameters; from serial port
communications parameters to receiver operation parameters and user interface
options.
CONVERSION BANDS (OPTIONAL-Depending on RF Range)
Path: / CONFIGS BANDS
Type: Sub Menu
Syntax: BANDS
Notes: CONVERSION BANDS describes the down converter setup. The frequency range of
the DTR may be extended according to the Block Downconverters installed.
CPU TASKS
Path: / STATUS TASKS-DIAGS
Type: Executable
Syntax: TASKS-DIAGS
Notes: Displays diagnostics on the CPU tasks, including task number, name, shell type and
activity.
DAC1 OUTPUT
Path: / CONFIGS OPERATION ANALOG-OUTPUTS DAC1 DAC1-OUTPUT
Type: Sub Menu
Syntax: DAC1-OUTPUT
Range: Integer: 0 .. 1
0 Disabled
1 Enabled.
Notes: Enables or disables this DAC output.