If you have the media bay battery, it extends your unplugged runtime.
Your notebook identifies the drive with the letter following the hard drive letter. If your hard drive is C,
then the media bay will be D.
To Change your swappable media bay device
1. Make sure the computer is not accessing the media bay drive.
2. Open the media bay door cover.
3. Double-click the "Safely Remove Hardware" icon the Windows tray taskbar.
4. Select the Media Bay device, then select Stop.
5. Wait for the "safe to remove hardware" message, then click OK.
6. Turn your computer over so you are looking at the bottom.
7. If installed, remove the screw in the media bay lock.
8. Slide the media bay lock toward the back of the computer.
9. Slide the media bay release toward the outside of the computer. The media bay should come part
way out of the computer.
10. Gras
the media ba
device b
the ed
es and
ull strai
ht out until it is clear from the slot.
Pa
e 32 of 92GoBook X
-1 Hel
8/3/2006file://C:\Documents and Settin
s\harwoodm\Local Settin
s\Tem
\~hh2D1C.htm
To Next Page
Loading...
Need help?
General