5-36
Convenience Features
5($52&&83$17$/(57ǭ52$Ǯǭ,)(48,33('Ǯ
Rear Occupant Alert is provided to help 
prevent the driver from leaving the 
vehicle with the rear passenger left in the 
vehicle.
System setting
To use Rear Occupant Alert, it must be 
enabled from the Settings menu in the 
infotainment system screen. Select: 
 - 6HWXSƟ9HKLFOH6HWWLQJVƟ
&RQYHQLHQFHƟ5HDU2FFXSDQW$OHUW
See additional information in supplied 
Infotainment Manual. 
System operation
ś First alert
When you open the front door after 
opening and closing the rear door and 
turning off the vehicle, the ‘Check rear 
seats’ warning message appears on 
the cluster.
ś Second alert
After the first alert, the second alert 
operates when any movement is 
detected in the vehicle after the 
driver’s door is closed and all the 
doors are locked. The horn will sound 
for approximately 25 seconds. If 
the system continues to detect a 
movement, the alert operates up to 8 
times.
Unlock the doors with the smart key 
to stop the alert.
ś The system detects movement in the 
vehicle for 8 hours after the door is 
locked.
ś The second alert is activated only after 
the prior activation of the first alert.
System precautions
ś Make sure that all the windows are 
closed. If the window is open, the 
alert may operate by the sensor 
detecting an unintended movement 
(for example, wind or bugs). 
ś  
 Cluster  Steering wheel
OJX1059019L ORG3EV051018
If you do not want to use Rear 
Occupant Alert, press the OK button 
on the steering wheel when the first 
alert is displayed on the cluster. Doing 
so will deactivate the second alert one 
time.
ś An alert can occur if the there is an 
impact on the roof.
ś If boxes or objects are stacked in the 
vehicle, the system may not detect 
the boxes or objects. Or, the alert may 
operate if the boxes or objects fall off.
ś The sensor may not operate normally 
if the senor is obscured by foreign 
substances.
ś The alert may operate if movement 
in the driver or passenger seat is 
detected.
ś The alert may operate with the doors 
locked due to car wash or surrounding 
vibration or noise.
ś If the vehicle is started remotely (if 
equipped with Remote Start), inside 
movement detection will stop.