5-86
Convenience Features
+,*+%($0$66,67ǭ+%$Ǯ
ORG3EV051075
High Beam Assist is a function that
automatically adjusts the headlamp
range (switches between high beam and
low beam) depending on the brightness
of detected vehicles and certain road
conditions.
Detecting sensor
ORG3EV071074
[1] : Front view camera
The front view camera is used as a
detecting sensor to detect ambient light
and brightness while driving.
Refer to the picture above for the
detailed location of the detecting sensor.
NOTICE
Always keep the front view camera in
good condition to maintain optimal
performance of High Beam Assist.
For more details on the precautions
of the front view camera, refer to
“Forward Collision-Avoidance Assist
(FCA)” section in chapter 7.
High Beam Assist Setting
OJX1059234L
With the Start/Stop button in the ON
SRVLWLRQVHOHFWœ/LJKWVƟ+LJK%HDP
Assist (or HBA (High Beam Assist))’
from the Settings menu to turn on High
Beam Assist and deselect to turn off the
function.
WARNING
For your safety, change the Settings
after parking the vehicle at a safe
location.
To Next Page
Loading...
Need help?
General
