9-39
09
Motor Compartment Panel Fuse
Replacement
Blade fuse / Cartridge fuse
 Blade type fuse
ORG3EV091009
 Cartridge type fuse
ORG3EV091010
1. Turn the vehicle off.
2. Turn all other switches off.
3. Remove the fuse panel cover by
pressing the tap and pulling up.
4. Check the removed fuse; replace it
if it is blown. To remove or insert the
fuse, use the fuse puller in the motor
compartment fuse panel.
5. Push in a new fuse of the same
rating, and make sure it fits tightly in
the clips. If it fits loosely, consult an
authorized retailer of Genesis Branded
products.
NOTICE
After checking the fuse panel in the
motor compartment, securely install
the fuse panel cover. You may hear a
clicking sound if the cover is securely
latched. If it is not securely latched,
electrical failure may occur from water
contact.
Multi fuse / Midi fuse
 Multi type
ORG3EV091011
 Midi type
ORG3EV091012
If the multi fuse or midi fuse is blown,
consult an authorized retailer of Genesis
Branded products.
To Next Page
Loading...
Need help?
General
