Genesis G80 2023 User Manual

7-87
07
Overtaking Acceleration Assist
Overtaking Acceleration Assist operates
when the turn signal indicator is turned
on to the left while Smart Cruise Control
is operating, and the following conditions
are satisfied:
ś Your vehicle speed is above 40 mph
(60 km/h)
ś The hazard warning flasher is off
ś A vehicle is detected in front of your
vehicle
ś Deceleration is not needed to
maintain distance with the vehicle in
front
WARNING
ś When the turn signal indicator is
turned on to the left while there is
DYHKLFOHDKHDGWKHYHKLFOHPD\
DFFHOHUDWHWHPSRUDULO\3D\DWWHQWLRQ
WRWKHURDGFRQGLWLRQVDWDOOWLPHV
ś 5HJDUGOHVVRI\RXUFRXQWULHVGULYLQJ
GLUHFWLRQ2YHUWDNLQJ$FFHOHUDWLRQ
Assist will operate when the
FRQGLWLRQVDUHVDWLVILHG:KHQ
using the function in countries with
GLIIHUHQWGULYLQJGLUHFWLRQDOZD\V
check the road conditions at all
WLPHV
Display and Control
Basic function
You can see the status of the Smart
Cruise Control operation in the Driving
Assist view on the cluster. Refer to “View
Modes” section in chapter 4.
Smart Cruise Control will be displayed
as below depending on the status of the
function.
 Operating  Temporarily canceled
ORG3EV071037N ORG3EV071298N
ś When operating
(1) Whether there is a vehicle ahead
and the selected distance level are
displayed.
(2) Set speed
(3) Whether there is a vehicle ahead and
the target vehicle distance
ś When temporarily canceled
(1)
indicator
(2) The previous set speed is shaded.
(3) Whether there is a vehicle ahead (if
equipped)

Genesis G80 2023 Specifications

General

Brand	Genesis
Model	G80 2023
Category	Automobile
Language	English