4-20
Instrument Cluster
LCD Display Messages
Shift to P
This message is displayed if you try to 
turn off the vehicle without the gear in 
the P (Park) position.
If this occurs, the Start/Stop button turns 
to the ACC position.
Vehicle is in N. Press START button 
and shift to P (and turn vehicle off)
This message is displayed if you try to 
turn off the vehicle with the gear in N 
(Neutral). 
To turn off the vehicle:
1.  Press the Start/Stop button. The 
button will change to the ON position. 
2.  Press the P button to shift to P (Park).
3.  Press the Start/Stop button again, 
then the vehicle will turn off. 
Low key battery 
This message is displayed if the battery 
of the smart key is discharged while 
changing the Start/Stop button to the 
OFF position.
Press START button while turning 
wheel (if equipped)
This message is displayed if the steering 
wheel does not unlock normally when 
the Start/Stop button is pressed.
You should press the Start/Stop button 
while turning the steering wheel right 
and left.
Low washer fluid (if equipped)
This message is displayed if the washer 
fluid level in the reservoir is nearly empty.
Have the washer fluid reservoir refilled.
Check steering wheel lock system  
(if equipped)
This message is displayed if the steering 
wheel does not lock normally while the 
Start/Stop button is pressed to the OFF 
position.
Press brake pedal to start vehicle 
This message is displayed if the Start/
Stop button changes to the ACC position 
twice by pressing the button repeatedly 
without depressing the brake pedal.
You can start the vehicle by depressing 
the brake pedal and then pressing the 
Start/Stop button.
Key not in vehicle 
This message is displayed if the smart 
key is not in the vehicle when you leave 
the vehicle with the Start/Stop button in 
the ON or Start position. 
Always turn off the vehicle before leaving 
your vehicle.
Key not detected
This message is displayed if the smart 
key is not detected when you press the 
Start/Stop button.
Press START button again 
This message is displayed if you were 
unable to start the vehicle when the 
Start/Stop button was pressed.
If this occurs, attempt to start the vehicle 
by pressing the Start/Stop button again.
If the warning message appears each 
time you press the Start/Stop button, 
have the vehicle inspected by an 
authorized retailer of Genesis Branded 
products.