5-18
Convenience Features
Smart phone change
Follow the procedure below to use the 
digital key in your new smart phone.
1.  Install the Genesis Digital Key App and  
log in.
2.  From the infotainment system settings  
menu, first delete the previous digital 
NH\'LJLWDO.H\Ɵ6PDUWSKRQHNH\Ɵ
Delete), and then save the digital key 
again.
3.  If you have shared the digital key with 
others, you will need to re-share the 
digital key.
6PDUWSKRQHUHVHW$SSGHOHWHUHLQVWDOO
App data delete
Follow the procedure below to use the 
digital key when the smart phone was 
reset, the app was deleted and then 
reinstalled, or the app data was deleted.
1.  Install the Genesis Digital Key App and  
log in.
2.  Input the PIN number for user 
verification. If PIN is correct, digital 
key data will be downloaded to the 
user’s smart phone and you can use 
the digital key without any further 
registration or sharing procedure.
Smart phone operability with Digital Key
The Digital Key App may not be available 
on some smart phones. Check for 
available smart phone models on the 
Genesis website. The smart phone NFC 
antenna location guide can be confirmed 
on the Genesis website or contact the 
smart phone manufacturer’s customer 
service center.
Digital Key (Card Key)
How to register Digital Key (Card 
Key)
To use the card key as a digital key, 
follow the following procedure.
For Android smart phones
1.  Install Genesis digital key app in main 
user’s smart phone and register the 
digital key (smart phone). Please refer 
to the registration method of the digital 
key (smart phone).
1-1.  Activate Genesis digital key app and 
WKHQVHOHFWŕ0HQXƟ6HWWLQJVƟ&DUG
Key Enroll Authentication”. Please 
follow the digital key authentication 
procedure according to the app.
 - Bluetooth authentication : Before 
starting the process, the driver 
needs to make sure to check 
whether the Bluetooth connection is 
working properly. To enroll the card 
NH\SOHDVHVHOHFWŕ0HQXƟ6HWWLQJV
Ɵ&DUG.H\(QUROO$XWKHQWLFDWLRQŖ
 - in the top right corner of the digital 
key app. The card saving process 
should be completed within 5 
minutes after the authentication 
process is done in the vehicle.
 - NFC authentication : After selecting 
NFC authentication, please contact 
the smart phone on the driver’s or 
passenger’s outside door handle.
1-2. Get in the vehicle with the smart key.
Except Android smart phones
1.  Get in the vehicle with two smart keys.