6-10
Driving Your Vehicle
Rotate the Shift Dial Manually in
Case of Emergency
OJWEV061014
OJWEV061053
OJWEV061015
If the drivable indicator ( ) is on
and it cannot rotate normally in ‘shift
dial mode’, try restarting the vehicle by
pressing the start button. If the same
phenomenon repeats after restarting,
pull the upper surface of the crystal
sphere strongly toward the rear of the
vehicle with your palm and rotate it until
the shift dial is fully visible. At this time,
you may hear a normal ‘click’ sound,
which releases the restraint of the
instrument.
CAUTION
ś The manual mode switching function
must be used only in an emergency.
Use under normal circumstances
may cause malfunction.
ś When switching to manual mode,
be sure to pull towards the rear of
the vehicle. Forcibly pushing in the
forward direction may damage the
part.
ś If normal mode conversion is
continuously impossible, contact
an authorized retailer of Genesis
Branded products for inspection and
maintenance.
To Next Page
Loading...
Need help?
General
