Genesis GV60 2023 - Vehicle to Load (V2 L)

1-15
01
Vehicle to Load (V2L)
V2L is the system provides AC power
using the high voltage battery for driving
to operate several electronic products.
OJWEVQ011095N
6HOHFWœ(9Ɵ(9&KDUJH7UDQVIHUŔRQWKH
screen.
You can set the battery discharging limit
for high voltage battery for driving.
OJWEVQ011096L
If the vehicle reaches to the limit, it
automatically cut supply of electricity.
Energy information
6HOHFWœ(9Ɵ(QHUJ\,QIRUPDWLRQŔRQWKH
screen.
You can check battery discharging level.
How to connect
Outdoor
ORG3EVQ011070
1. Open the cover of the V2L connector.
2. Close the cover after connecting
home appliances and electronical
products to the power outlet.
3. Connect the V2L connector to the
charging inlet on the vehicle.
4. Press the switch (1) of the V2L
connector and check whether the
light (2) is on or off. The light (2) may
not turn on normally when:
- See the battery discharging limit
for high voltage battery for driving
in ‘Electricity Use’ menu on the
screen. If it is higher than the
current amounts of high voltage
battery, the light (2) does not turn
on.
- Check whether the light of V2L
connector turns on or not.